Humimeter BL2 wood chip and round wood moisture meter

Article no. 12109 humimeter BL2 wood chip and round wood moisture meter with insertion probe, ram electrode or special probe

humimeter BL2 wood chip and round wood moisture meter

Only the exact determination of water content with an appropriate wood chip and round wood moisture meter allows fair payment for producers, suppliers and end customers. The water content of wood chips and round wood determines the fuel value. This makes quality control in the manufacturing and supply of biomass increasingly important. Using a humimeter BL2 wood chip and round wood moisture meter you can prevent machine problems and avoid paying the high product price only for water.

The humimeter BL2 wood chip and round wood moisture meter is a universal moisture meter for determining the water content of biomass.
With humimeter BL2 wood chip and round wood moisture meter you can easily determine the water content of your material within few seconds. The measuring values can be stored on the humimeter BL2 wood chip and round wood moisture meter and optionally printed out at an external printer or sent to a PC if required.

As the water content of wood chips, round wood and all energetic materials can vary significantly within one single charge, the wood chip and round wood moisture meter is equipped with an automatic calculation of the average value. You just effect about 10 single measurements, and the wood chip and round wood moisture meter determines the average. This is a very quick and efficient method to obtain exact measuring results.

Handling / measuring procedure

Measuring procedure with humimeter BL2 ram electrode for determination of water content of round wood and split logs

Plug in the sensor cable of the BL2 hammer into the socket and fix it with the knurled nut.

Switch on the humimeter BL2 wood chip and round wood moisture meter and select the right wood type (calibration curve).

Choose a part of the wood WITHOUT bark, branches, pitch pockets or cracks and drive the ram electrode in the right angle to the grain into the wood. Hold the top of the electrode with one hand and push down the handhold with active force until the desired depth is reached.

The display of the humimeter BL2 wood chip and round wood moisture meter immediately shows the water content and temperature.

Measuring procedure with humimeter BL2 insertion probe for wood chips, sawdust and pellets

Plug in the sensor cable of the BL2 insertion probe into the socket and fix it with the knurled nut.

Switch on the humimeter BL2 wood chip and round wood moisture meter and select the right calibration curve.

Insert the probe straightly into the wood chips pile.

The display of the humimeter BL2 wood chip and round wood moisture meter immediately shows the water content and temperature.
For further details please refer to the user manual.

humimeter BL2 wood chip and round wood moisture meter – YOUR BENEFITS:

Measurement of wood chips and round wood and further materials with one single device
Automatic averaging
Good accuracy
Datalog function
USB interface (optional)

Applications:

Combined measuring instrument for insertion probe for wood chips, ram electrode for round timber and split logs or special probe.
For measuring round timber, split logs, wood chips, sawdust, wooden pellets, shredded olive stones, hay and straw bales.

Quotation request

Features:

Resolution: depending on the sensor
Measuring range: depending on the sensor up to 60% water content (depending on the material)
Automatic temperature compensation
Temperature measurement range: depending on the sensor
Temperature can be set to °C or °F as required
Measurement within seconds
Hold function, manual saving of results, datalog for 10.000 logs with measuring point report
Supplier´s data can be recorded
Large, well-lit LC display
Scope of supply: humimeter BL2 with rubber protection cover and batteries
Required accessories: measuring probes
Selectable measuring probes: article no. 12518, 12520 or 12521 (in connection with article no. 12520)
Optional:humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, printer, wooden case

Your benefits:

High measuring range up to 60% water content (depending on the material)
Different measuring probes for measurements up to a depth of 1 meter available
Quality control and documentation everywhere on site
Automatic averaging
Menu languages: English, German, Italian, French, Spanish, Russian and many others on request

Infocenter

Further documentation about replacement parts, products-total summaries, comparison tables, characteristic information, manuals, see the Info Center

PDF-brochure Humimeter BL2

Extended accessories

art. no.	picture	Extended accessories
12518		BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets and sawdust; measuring range wood chips 10 – 50% water content, wooden pellets 11 – 20% water cotent, sawdust 14 – 50% water content
12520		BL2 hammer (ram electrode) with 2 meter cable, for determination of water content of round timber and split logs, measuring range 8 to 60% water content, depending on the type
12521		Set of tips for measuring hay and straw bales, for mounting at BL2 hammer article no. 12520
12278		humimeter USB humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC
12540		Wooden case for humimeter BL2
11929		Alternative to wooden case: plastic case (for humimeter BL2 and the following accessories: 12520, 12521)
11733		Thermo printer runs by battery, industrial model, portable
12308		test block for humimeter BLL, FL1, FL2, BLW, BL2, WLW, SLW and BLO
12472		measuring head for humimeter BLL and BL2 (spare part)